Ideales Team

Mit der allPixa SWIR-Kamera (l.) und der Corona II SWIR LED-Beleuchtung (r.) wurde eine ideal aufeinander abgestimmte Inspektionslösung entwickelt. Die Kamera arbeitet im Bereich von 950 bis 1700nm. Die Beleuchtung bietet Wellenlängen von 1100, 1300, 1450nm.

Mit der allPixa SWIR-Kamera und der Corona II SWIR LED-Beleuchtung von Chromasens wurde eine ideal aufeinander abgestimmte Inspektionslösung für SWIR-Anwendungen entwickelt.

Sensorausrichtung

Bild 1 | Effekte eines nicht ideal ausgerichteten Image Sensors (v.l.n.r.): Verschiebung, Drehung, Neigung und korrekte Ausrichtung.

Ein falsch im Kameragehäuse ausgerichteter Sensor beeinflusst die Bildqualität oder das Sichtfeld eines Bildes. Auch eine ungenaue Ausrichtung des Objektivs zum Sensorboard kann zu Beeinträchtigungen führen. Eine perfekte Ausrichtung entlang der optischen Achse vom Sensor bis zum Objektiv ist eine Herausforderung, der sich jeder Systementwickler stellen muss.

Stiching & Trashing

Figure 1: Because data rates exceed the capacities of a single CXP frame grabber, the Phantom S990 is equipped with 16 outputs and requires four CXP grabbers to perform at its full throughput potential.

The Cyton-CXP4 CoaXPress frame grabber of Bitflow has been verified to be compatible with the Vision Research Phantom S990 camera. The camera delivers direct data transfer speeds of 9Gpx/sec (70Gbps), streaming a maximum of 937fps at 4,096×2,304 (8bit), or up to 680,000fps at lower resolution settings.

Remote Schweißen

Mit ihrer flexiblen Halterung ist die seelectorIcam Kamera nah am Schweißprozess. Das robuste Gehäuse bietet Schutz beim Einsatz in Lehre und Ausbildung.

Mit dem SeelectorIcam-Bildungspaket von Hema Electronic werden bei der BFI Steiermark Schweißprozesse auf einem Monitor im Lehrsaal visualisiert. Damit sind Details wie Zündfunke, Schmelze und Schweißflamme besser darstellbar. Für alle Kursteilnehmer ist nachvollziehbar, worauf es beim Schweißen ankommt.

604 Megapixel

Bild 1 | The 604 MP resolution area scan camera of Hikrobot has a full resolution up to 28416×21280 Pixel and a maximum framerate of 1.5fps.

With the increasing popularity of high resolution displays, the requirement for ultra-high resolution camera increases rapidly in Flat Panel Display (FPD) industry. The 604 MP resolution area scan camera of Hikrobot was developed.

MIPI CSI-2 v4.0

Die Version 4.0 der MIPI CSI-2-Kamera-Spezifikation ermöglicht Always-on-Imaging-Lösungen für ultra-low-Power-Vision-Anwendungen, die über nur zwei Kabel betrieben wird. MIPI CSI-2 v4.0 fügt außerdem eine Multi-Pixel-Kompression für die neuesten Bildsensoren und RAW28-Farbtiefe hinzu.

Divided Transistors

Image 1 | Architecture of the new Stacked CMOS image sensor

Sony Semiconductor has developed a stacked CMOS image sensor technology with 2-Layer Transistor Pixel. Whereas conventional CMOS sensors‘ photodiodes and pixel transistors occupy the same substrate, the new technology separates photodiodes and pixel transistors on different substrate layers.